Clip Tab Alarm is a personal safety alarm that attaches to the patient's clothing via a clip, with a cord connected to an alarm unit. If the patient moves beyond a set distance or attempts to stand without assistance, the tab detaches and triggers an audible alert, notifying caregivers immediately. It is commonly used for patients in wheelchairs, recliners, or beds who are at fall risk.

The clip tab system is simple to apply and does not restrict the patient's mobility while remaining an effective supervision aid.

Operating Instructions

Emergency telephone number is on your equipment. (618)234-0202

Please follow instructions given by the equipment technician. Please follow your doctor's orders.

Set-up Magnetic Clip Alarm

1. Attach magnetic alarm to wheelchair or bed.
2. Place magnetic sensor in the sensor area.
3. Clip cord to a piece of clothing the patient is not likely to remove, and out of patient's reach.
4. A pull on the cord will cause the magnetic sensor to release sounding the alarm.
5. Stop alarm either by replacing the magnetic sensor or turning the unit off.
6. Patient/Caregiver demonstrates each step and has a solid understanding.

Cleaning

Clean monitor and pad as necessary by wiping with clean cloth.

Safety

• Test the alarm before each use. Inspect the pads and monitor regularly to be sure they are not damaged.
• Long cords can entangle with patient and be potentially dangerous. Use care and supervision.
• Do not place magnet closer than 6 inches of an implanted device.
• Alarms should be used in conjunction with an approved fall management program. It is not intended as a substitute for appropriate patient monitoring techniques.

OxyCare Medical Supply Co. 2725 South Belt West, Belleville IL 62226